Difference between revisions of "PMT (Photo Multiplier Tubes)"

From EWIKI
Jump to navigation Jump to search
imported>Mh
imported>Mh
Line 18: Line 18:
 
'''Socket:'''  
 
'''Socket:'''  
 
C6270 is a high voltage power supply socket assembly for 28 mm (1-1/8 inch) diameter side-on photomultiplier tubes (PMTs), incorporating a regulated high voltage power supply and an active voltage divider. It enables simple yet stable photomultiplier tube operations with extended DC output linearity by only supplying +15 V and connectiong to a potentiometer or a 0 V to +5 V for high voltage adjustments. [http://www.hamamatsu.com/jp/en/product/alpha/S/3054/C6270/index.html Quelle: Hamamatsu]
 
C6270 is a high voltage power supply socket assembly for 28 mm (1-1/8 inch) diameter side-on photomultiplier tubes (PMTs), incorporating a regulated high voltage power supply and an active voltage divider. It enables simple yet stable photomultiplier tube operations with extended DC output linearity by only supplying +15 V and connectiong to a potentiometer or a 0 V to +5 V for high voltage adjustments. [http://www.hamamatsu.com/jp/en/product/alpha/S/3054/C6270/index.html Quelle: Hamamatsu]
 +
 +
* Red: In +15 V
 +
* Blue: Out Vref = +5 V
 +
* White: HV Control (50K Ohm)
 +
* Black: GND
 +
* Coax out: Signal
  
 
=== R928HA + LM359N Board ===
 
=== R928HA + LM359N Board ===

Revision as of 16:45, 27 December 2014

Siehe auch Regelbares HV Netzteil

Types

Hamamatsu 1P28

  • Type: Side on
  • Spectral range of 185 to 650 nm with a peak wavelength at 340 nm
  • Supply:

PMT 1P28.JPG

Du Mont K1303

  • Type:
  • Socket: 9

PMT K1303.JPG

Hamamatsu Typ 1477 + Sockel C6270

PMT R1477.JPG

Socket: C6270 is a high voltage power supply socket assembly for 28 mm (1-1/8 inch) diameter side-on photomultiplier tubes (PMTs), incorporating a regulated high voltage power supply and an active voltage divider. It enables simple yet stable photomultiplier tube operations with extended DC output linearity by only supplying +15 V and connectiong to a potentiometer or a 0 V to +5 V for high voltage adjustments. Quelle: Hamamatsu

  • Red: In +15 V
  • Blue: Out Vref = +5 V
  • White: HV Control (50K Ohm)
  • Black: GND
  • Coax out: Signal

R928HA + LM359N Board

  • Type:
  • Socket:

PMT R928HA.JPG

Links